News_News_Qingzhou Shengxinyuan Machinery Factory

01-20 

Press down on the aluminum motor housing, motor housing material description

Under normal circumstances, the general small generator casing is made of cast steel, and the large generator is welded with steel plates.

01-20 

What are the hazards of die-cast aluminum motor housing if it is not grounded?

When installing the motor, the wiring of the motor is very important. If the wrong wire is connected, it may bring a series of unnecessary troubles. In the process of wiring, the editor of Yaoguan Qibao Motor Equipment Factory in Wujin District, Changzhou reminds everyone that the motor shell must be grounded, because the damage of the motor shell without grounding will be very serious.

01-20 

Be sure to remember to clean the motor case during motor maintenance!

Usually, the maintenance of the motor should pay attention to: keep the motor clean and free of dust; often check the appearance of the motor to see if there is any dislocation of parts; often check the bearings for replacement or refueling, and also check the incoming wire terminals; don't forget one more thing Yes, the motor housing must be cleaned!

01-20 

Aluminum alloy motor housing technology and development mileage

After the 1990s, China's die-casting industry has achieved amazing development and has developed into a new industry. At present, the aluminum alloy die-casting process has become one of the most widely used processes in the aluminum alloy forming process for automobiles, accounting for 49% of the various automobile forming process methods.

01-20 

Aluminum alloy motor shell manufacturers answer the non-performance fault solutions of aluminum-gold motors

Shandong professional aluminum alloy motor shell manufacturers answer the non-performance fault solutions of aluminum alloy motors, household appliances, such as electric fans, refrigerators, washing machines, range hoods, vacuum cleaners, and single-phase AC motors for working power. The simple structure of the motor allows some rare faults to be repaired under amateur conditions.

11-25 

Y2 four-post motor housing B14 installation method

The Y2 four-column series motor shell is used as the motor shell to protect the motor. If the motor is to be used for a long time, a good and suitable motor shell must be selected.

11-25 

Aluminum alloy stretching motor shell

Product model: The inner hole ranges from 46 mm to 200 mm, and there are 281 kinds of casing molds of various specifications and shapes

11-25 

Features of JW Motor Housing B3 Housing Products

Product features: 1. The density of aluminum is relatively small, which can reduce the weight of the whole machine.

11-25 

AO2 motor shell B14 installation method

Product material: aluminum alloy Product model: The inner hole ranges from 46 mm to 200 mm, and there are 281 kinds of casing molds of various specifications and shapes

11-25 

YS motor shell B3 chassis fixed foot high wire and base

YS series motor shells are mainly used for YS series motors. This series of motors has the characteristics of large starting torque, high functional indicators, reliable operation and convenient maintenance. It can be widely used in low-power mechanical transmission equipment.